Lillehammer 2296BL is an outdoor wall light shaped as an upright rectangular block of die-cast aluminium, powder-coated black (RAL 9005). Light leaves only through the top pane of clear safety glass, behind which sits a single LED module. The driver is built in, so the light needs no bulb.
What light it gives
The module throws one 60° beam upwards: a widening cone of light appears on the wall above the fitting, while the wall below it stays dark. All of the output goes upwards (ULOR 100%), which matters where rules limit light sent into the night sky. The luminaire draws 4 W and delivers 108 lm, while the module alone is rated at 504 lm — the lower figure is what actually leaves through the glass. This is a light for picking out a wall, a pillar or a strip of façade, not for lighting an entrance or a path.
2700 K is a warm, slightly yellowish white, and Ra 80 is the usual colour rendering for outdoor lighting. The light can be dimmed with a trailing-edge phase dimmer, because it uses a Philips Xitanium TE driver. The light source has energy class D.
Size and installation
The body is 18.5 cm high and 8 cm wide and projects 11 cm from the wall — compare the width with the free wall between windows. The fitting weighs 1.57 kg and is fixed through two ø5 mm holes spaced 45 × 130 mm, following the enclosed instructions.
The terminals take conductors up to 3 × 2.5 mm², or up to 3 × 1.5 mm² when looped through, so several lights can run from one circuit. An EPDM gland seals round cable 7–10.5 mm in diameter. It is protection class I and must be earthed; a qualified electrician installs it.
Durability and service
IP65 lets the light stay on an unsheltered wall, and IK08 protects it against knocks where it hangs within reach. It works in temperatures from −20 to +45 °C, and the driver is rated for 50,000 h. Only a professional service replaces the LED module and control gear, using repair kit ZS2296zx0009.
To order, Norlys also makes this fitting in another RAL colour. It is intended for walls, façades and other architectural schemes — a smooth black block without ornament suits modern, minimalist architecture.