Vasa 128CS is an outdoor LED wall light shaped like a half-cylinder set flat against the wall. The body is cast aluminium powder-coated in a corten-steel colour – the rusty brown shade, close to RAL 8011, comes from the coating, not from the metal itself. Clear, textured polycarbonate diffusers stabilised against UV sit in the top and bottom faces, so the light shines upwards and downwards at the same time.
Dimensions and mounting
The light is 31 cm wide and 12.5 cm high and projects 15.5 cm from the wall; it weighs 2.27 kg. It can be fixed through an intermediate plate with two 5 × 10 mm adjustment slots spaced 45 mm apart – the slots let you level the fitting after drilling – or directly through two ø5 mm holes spaced 68 mm apart.
The terminals take conductors up to 3 × 2.5 mm², and up to 3 × 1.5 mm² for loop-through, so several lights on one façade can be wired in a chain. The EPDM cable gland accepts round sheathed cable of 7–10.5 mm diameter. It is a protection class I luminaire and must be connected to a protective earth.
What light it gives
The two Philips Fortimo LED modules produce 1128 lm in total, and 631 lm leave the luminaire at 8.5 W. Half of the flux goes up (ULOR 50%) and half goes down, so the wall shows two bright bands above and below the fitting rather than reading light in front of the door. 3000 K is a warm white, CRI 80 is the usual colour rendering outdoors, and SDCM3 means neighbouring lights on one wall shine in the same tint.
The built-in Philips Xitanium TE driver is dimmed with a trailing-edge phase dimmer. The LED modules and the driver are replaced only by a professional service; Norlys quotes L80B20 over 72,000 h and 50,000 h for the driver.
Durability and use
IP65 means the light is dust-tight and protected against water jets, and IK08 means it withstands an impact of 5 J. The gasket is silicone, and the operating range is −20 to +45 °C. Norlys designed Vasa for lighting walls, façades and other architectural projects. To order it is also made with a motion sensor, with DALI2 or 1–10 V control and in 2700 K.