Rendl MARENGA RD6 96 R14010 is an LED fitting for recessing into a plasterboard ceiling, with a white PLA shade made by 3D printing. Repeated triangular facets articulate its cylindrical shape. The decorative shade remains visible below the ceiling rather than forming a flat downlight trim.
Check the cut-out separately from the shade
The shade is 9.6 cm high, with a diameter listed by the manufacturer as 9.9 cm. The fixing opening is different: sliding mounting springs accommodate a cut-out of 5–7 cm. This adjustment matters when replacing an existing halogen fitting and trying to reuse its opening. Measure the actual hole before ordering; the outside diameter of the decorative body is not the required cut-out size.
The specified recessed depth is 4 cm. Also check the ceiling void for the electrical connection and supplied driver. The height of the visible shade does not describe the space needed above the plasterboard. A qualified installer must carry out the work with the electrical supply switched off.
Warm-white LED supplied with the fitting
The integrated LED is rated at 6 W, so there is no separate screw-in bulb to choose. Its 3000 K colour temperature denotes warm white, and the declared luminous flux is 570 lm. Relate this output to the room dimensions and other light points when planning the installation. It should not be read as a promise that one fitting will illuminate any room on its own. A driver for connection to a 230 V supply is included.
A geometric ceiling detail
The white finish and faceted relief suit modern and modernist interiors. Use it as a decorative light point in a living room, bedroom or dining area; the manufacturer's listed applications also include kitchens, hallways, children's rooms and staircases. The number and spacing of fittings still need to follow the lighting plan. The installation manual warns that the shade is fragile. Avoid pressing on its walls during fitting or subsequent handling.