The 1233GR shade is an aluminium attachment shaped like a short cylinder 80 mm in diameter and cut at an angle: on one side it is 77.1 mm long, and towards the other it tapers almost to the rim. It fits onto the front of NORLYS spotlights from the Sande series. The 1233GR version is powder coated in graphite RAL 7016.
Which spotlights it fits
According to the manufacturer's data sheet, the shade is intended for the Sande spotlights 1592, 1593, 1594, 1598, 4083, 5052 and 5053. The spotlight is not included: the shade is a separate accessory, and the box, measuring 8.5 × 8.5 × 9.5 cm, contains the attachment alone. Its 80 mm diameter matches the front of the luminaire it slides onto, as the drawing in the installation manual shows.
The graphite versions of the Sande spotlights are painted in the same RAL 7016, so the 1233GR shade and the luminaire share one shade of grey. Norlys also makes the shade in black RAL 9005 (1233BL), with other colours from the Colors Template range available to order.
What it changes in the spotlight's light
In the manual drawing, the longer side of the shade projects over the spotlight's glass like a small roof. It hides the bright source from anyone looking from that side and limits the light thrown in that direction, while the rest of the beam leaves through the open, angled front. This matters wherever someone may look straight into the luminaire.
Material and installation
The shade is made from an extruded aluminium profile with a powder coating. Aluminium does not rust, and the powder coating protects the surface of a part that stays outdoors all year round together with the spotlight.
Installation follows the manual supplied with the product: the shade slides onto the front of the spotlight and is screwed in place from the top. The manual shows a hand screwdriver and crosses out a power screwdriver, so the screw is not tightened with a power tool. The shade has no electrical parts and does not change how the luminaire is connected.