TEKKNI HORST combines a black anodised aluminium profile with a frosted M22 diffuser for installation in plasterboard. This 38-1221-20 version is 2.02 m long and takes two LED strips side by side. It is a kit for building linear lighting, rather than a finished light with a specified output or colour temperature.
Plaster-in installation
The profile has perforated side flanges that are covered with joint compound. The compound passes through the holes, leaving the diffuser line visible instead of a wide frame once the plasterboard is finished. Installation therefore needs to be planned during the plasterboard work, not after the surface has been completed.
The full cross-section is 49 mm wide and 14.2 mm high, with an internal strip channel 22 mm wide. Compare these dimensions with the planned construction and the width of your chosen strips. The manufacturer does not provide for joining these profiles into a continuous line, so allow for the 2.02 m length when laying out an individual section.
What is included and what to choose separately
The kit contains one HORST profile, one M22 polycarbonate diffuser and four plastic HORST end caps. This version has a frosted diffuser, not a clear or milky one. If you need extra components, select M22 diffusers and HORST-system end caps rather than matching parts by length alone.
LED strips and a power supply must be selected separately and are not part of the listed kit contents. The strips you choose determine the brightness and light colour of the completed installation. The power supply sits outside the profile, so plan its position and the cable route along with the plasterboard construction.