Luces Exclusivas ANUCO LE44613 is a compact wall light made from black metal and lightly tinted glass in smoky-grey tones. Its integrated 3 W LED produces 478 lm of warm 3000 K light.
Smoked glass with a black wall plate
The rounded glass shade has a softly smoked surface through which diffused light and the outline of the inner assembly remain visible. Images of the exact model show a black round wall plate, a short horizontal support and black details at the lower edge of the glass. Metal and translucent glass create a clear contrast even when the light is switched off. The official lifestyle image places a pair on either side of a bed, while the producer also names hallways and bedrooms as example indoor settings.
Dimensions of 22 × 20.5 × 14 cm
The wall light is 22 cm high, 20.5 cm wide and projects 14 cm from the wall. These proportions are confirmed by both the official product card and the product drawing; the drawing also depicts a wall plate about 10 cm high. Check the 14 cm projection against nearby furniture, doors and circulation space before selecting a position. The shade is glass, so it must be supported during installation and protected from impact while the mounting plate and electrical connection are handled.
Integrated 3 W LED producing 478 lm
An integrated 3 W LED source is included. The producer specifies a luminous flux of 478 lm, a 3000 K colour temperature and a 230 V supply. Warm white light works with the smoky surface to create illumination intended for an interior. This fitting is not dimmable and should not be connected to a phase-cut controller to vary its output. The module does not use a replaceable bulb; treat the product as a single-light fitting. Follow the producer's instructions throughout installation and use.
IP20 for a dry indoor location
IP20 provides no protection against water, so ANUCO is intended only for a dry interior. Official specifications do not support outdoor installation or a position exposed to splashes. Isolate the supply before work, secure the round plate to a stable substrate and make all electrical connections in accordance with the instructions and local rules. A suitably qualified installer should perform work on the 230 V circuit. Clean the glass with a soft dry cloth only when the fitting is switched off and cool.