Asker 5124BL is a bollard light shaped like an upside-down L: a narrow, rectangular shaft 85 cm tall ending in a head that reaches 20 cm to the side. Light leaves from under the head, downwards, through a clear UV-stabilised polycarbonate diffuser with a textured surface. The body is cast aluminium powder-coated black (RAL 9005), and the whole light weighs 4.01 kg.
How much light it gives and where it falls
The fitting draws 7.2 W and delivers 600 lm – the LED module itself produces 1096 lm, and the rest stays in the optic that aims the light at the ground. That is brightness for a path, garden steps or the edge of a driveway beside the bollard, not for lighting a whole garden. 4000 K is a neutral white, and CRI 80 renders colours correctly for everyday use. ULOR 0.6% and a BUG rating of B0-U1-G0 mean almost nothing shines upwards.
The bollard is phase-dimmable, but only with a trailing-edge (TE) dimmer – a leading-edge dimmer is not suitable. The maker gives a module lifetime of 102,000 h at L80 and 50,000 h for the driver. The LED module and driver can be replaced, but a professional service does it, using Norlys service kits.
Mounting and connection
The base is bolted down through four ø8 mm holes spaced 18 × 50 mm. The 1907ZX concrete-in anchor, 1908GA ground anchor, 1909GA concrete-foundation adapter and the 3081 and 3090GA mounting adapters are sold separately, so the fixing is chosen to suit the ground. The terminals allow further bollards to be looped on, and the EPDM gland takes round cable from 4 to 13.6 mm in diameter in three ranges.
IP65 lets the bollard stand in open ground, IK10 is the highest impact-resistance class, and protection class I requires a protective earth. The operating range is -20 to +45 °C. The plain geometric form without ornament suits modern architecture – the maker intends it for gardens, private grounds and architectural projects.