Endon Allegra is a single-light wall fitting with a rounded, clear glass shade patterned with spiralling lines. Its metalwork has an antique brass finish, a circular wall plate and a short projecting arm supporting the glass below. The bulb remains visible through the shade, so its shape contributes to the appearance even when the light is off.
Dimensions and wall space
The fitting is 23 cm high and 12 cm wide, projecting approximately 16 cm from the wall. Compare these measurements with the space beside furniture or along a passage before installation: the shade stands forward of the wall rather than sitting flat against it. Its narrow width does not describe the clearance needed in every direction.
The combination of brass-coloured metalwork and patterned glass gives Allegra a modern classic character. As decorative wall lighting it can complement a living room, bedroom or hallway. Matching ceiling fittings in the Allegra family allow the same glass detail to be repeated elsewhere in the interior.
Bulb choice and dimming
You need one E14 LED bulb rated up to 7 W, purchased separately. No bulb is included, so brightness and light colour depend on the lamp you select rather than on the wall fitting itself. The transparent shade leaves the bulb visible instead of concealing it behind an opaque cover.
Dimming requires a dimmable bulb and a compatible dimmer. Replacing an ordinary bulb with an LED bulb does not, by itself, provide dimming control.
Connection and care
Allegra connects to a 220–240 V, 50 Hz supply and must be earthed. The instructions specify indoor use and exclude bathrooms. Supplied screws and wall plugs are for masonry; other surfaces require suitable fixings chosen separately. Isolate the electricity supply before installation or bulb replacement. Clean only with a dry cloth, without liquid or abrasive cleaners, as instructed by the manufacturer.