LUMINES APA12 is an aluminium profile for building into 12 mm plasterboard. The flange, 39.4 mm across in total, is plastered in along with the board, so once the surface is finished only the 10.2 mm lit slot remains visible. This item is a 2.02 m length in the silver anodised finish.
What it is for
The manufacturer describes APA as a wall and ceiling profile for lighting ceiling coves and decorative arrangements. The geometry is the point: the profile mounts on the surface or at an edge, where two planes meet, and it is what draws the characteristic line of light along the ceiling edge. It is not a profile for task lighting over a worktop — the output leaves perpendicular to the profile, and the manufacturer lists decorative lighting only.
Capacity and permitted load
The channel measures 9.0 mm wide and 13.6 mm deep, which suits a standard LED strip with room to spare for the wiring. The aluminium acts as the heatsink and sets the power ceiling: 32.2 W at a profile temperature of 55 °C and 43.4 W at 65 °C. The higher figure means a hotter profile and faster ageing of the diodes, so in a closed build-up it is worth designing closer to the lower limit. The driver is mounted outside the profile.
Limitations
The manufacturer notes that this profile cannot be joined into longer runs — each length works on its own, so the span has to be planned in advance. The profile is neither walk-over rated nor sealable; IP20 places it in dry interiors. Available lengths are 1.0 m, 2.02 m and 3.0 m, and up to 6 m to order, in silver anodised, white or black lacquered.
Specification
- Manufacturer: LUMINES Lighting
- System: APA12
- Catalogue number: 10-0404-20
- EAN: 5902973361711
- Material: aluminium
- Finish: silver anodised
- Length: 2.02 m
- Overall width including flange: 39.4 mm
- Body width: 20.5 mm
- Overall height: 20.2 mm
- Internal channel: 9.0 × 13.6 mm
- Light aperture: 10.2 mm
- For 12 mm plasterboard
- Mounting technique: to be plastered in
- Mounting method: surface, edge
- Beam direction: perpendicular to the profile
- For creating: decorative lighting, ceiling coves
- Maximum dissipated power: 32.2 W at 55 °C profile temperature
- Maximum dissipated power: 43.4 W at 65 °C profile temperature
- Driver location: outside the profile
- Ingress protection: IP20 (not sealable)
- Connectable: no
- Walk-over rated: no
- Other lengths: 1.0 m, 3.0 m, up to 6 m to order
- Other colours: white lacquered, black lacquered