MiBoxer CONTROLLER 12-24V 12A RF CCT FUT035S

MiBOXER receiver allows you to control LED tape. The connection between the receiver and the remote control is made using 2.4GHz radio waves. The receiver is mounted between the LED strip and the power supply, so it can be added at any stage of the strip installation.

Diagram of the connection of LED power supply, driver and LED tape

Receiver for MONO tapes is characterized by an innovative solution for mounting lighting elements. By combining the MiBOXER receiver with the MiBOXER MONO remote control(available separately), you can easily control the tape connected to a given controller. The number of controllers that can be connected to a given remote control is virtually unlimited.

Do not disturb" function
The "do not disturb" function prevents the controller from self-activating after power is restored in the event of a temporary power outage. The function can be activated and deactivated with the remote control.

Extended frequency range
The high and low frequency range has been extended to 16k-250Hz. This reduces the flickering effect which allows for a smoother transition effect when dimming the light.

Greater lighting control capabilities
Possibility to connect up to 12 remote controls and save 4 scenarios

Receiver allows control using apps and voice assistants. This requires pairing with a Wi-Fi gateway (sold separately). Use the app to adjust the lighting to the rhythm of your day. Reducing the brightness of the light at night or turning on the lights in a room in the morning - many possibilities from a single application.

The receivers have the function of auto-transmission of the signal sent from the remote control. This signal is transmitted from one receiver to another located at a distance of no more than 30 m. Compared to previous versions of the controllers in the V2 version, the signal is transmitted faster and more uniformly.. Appropriate placement of receivers allows you to control lighting throughout the apartment with a single remote control.

The ability to transmit and synchronize the signal

Pairing the remote control with the receiver is extremely easy. Perform the action of disconnecting the main power supply from the receiver (1), and then reconnect the power supply, where in the first 3 seconds briefly hold the previously selected channel on the remote control (2) respectively. The result of the correct pairing of the devices will be the blinking of the LED strip (3) three times.

Diagram of pairing the receiver with the remote control

Voltage DC12~24V Dimensions 36x17x74.5mm Working range 30m Frequency 2.4 GHz Working temperature -10~40°C