VITRUM Walec is a single-light pendant with a shade shaped as a short cylinder, wider than the tube above it and open at the bottom. The shade and the slim cylindrical tube above it are made of warm beige lacquered steel, and the round ceiling canopy is finished in the same colour. The lamp hangs from a cable whose length can be adjusted.
Size and mounting
The shade is 17 cm in diameter and 11 cm high. This is a small shade: a single lamp gives spot lighting, and over a longer table or kitchen island the manufacturer suggests hanging several lamps from the series side by side. The whole lamp weighs 1 kg.
The hanging height is set by the cable length — the whole lamp is at most 130 cm tall, so the shade can be lowered close to a worktop or raised higher over a walkway. Above a table, 70–80 cm is usually left between the lower edge of the shade and the tabletop. The fitting is fixed to the ceiling with a mounting bracket.
Which bulb and what kind of light
The fitting has one E27 lampholder and comes without a bulb. For an LED bulb the manufacturer gives a limit of 15 W. The fitting has no electronics of its own, so dimming depends on a bulb marked as dimmable and a dimmer switch.
The opaque steel shade directs the light downwards onto the surface below, leaving the ceiling and upper walls in half-shadow.
Colour and the VITRUM series
Warm beige (RAL 1019) is a light, sandy shade that, against light walls and wood, gives a calm, even look instead of strong contrast.
VITRUM is a series of seven shade shapes — Oczko, Dzwonek, Walec, Kopuła S, Kopuła M, Stożek and Koło — sharing the same tube-and-cable construction and offered in several colours. Different shapes and colours can therefore be hung together over a table, a kitchen island or a bar. The manufacturer intends the lamps for living rooms, dining rooms, kitchens, bedrooms, hallways and studies; the plain, unadorned form and single colour place them in a modern, minimalist style.