Britop Porcia 9181102 is a single pendant with a white ceramic lampholder and a metal ceiling canopy. Its anthracite fabric-covered cable is an exposed part of the design. There is no surrounding shade to conceal the bulb, so the small white holder, dark suspension and chosen light source together define its appearance.
The bulb is part of the design
One E27 socket takes a replaceable light source, allowing the bulb to be changed without replacing the complete fitting. The manufacturer's maximum rating is 60 W. That figure is a bulb limit, not a brightness rating or the consumption of every compatible bulb. Compare the light output, colour temperature and dimensions of the bulb separately when making your choice.
With no shade around it, the bulb remains visible even when switched off. A clear filament bulb will look different from an opal version. The pendant itself does not fix the colour temperature: that aspect of the lighting depends on the source fitted.
Check the suspension dimensions
The manufacturer's drawing specifies a height of 110 cm and a 100 cm cable section. The ceiling canopy is 10 cm in diameter and 3 cm high; the ceramic holder is 6 cm high and 4.5 cm in diameter. The 10 cm measurement therefore describes the ceiling component, not a shade or the diameter of your selected bulb. Compare these dimensions with the ceiling height and the surface below before installation.
A minimal pendant with an industrial detail
The exposed source and textile cable suit minimalist, modern and loft-style interiors. Consider one pendant above a small table or as an additional light point in a living room or bedroom. Several separate fittings can repeat the same detail above a longer table or kitchen island. Choose their number and bulb output for the area being lit, rather than relying on the decorative appearance of the bulbs alone.
Add your comment about Porcia Pendant Light, 1xE27, Max. 60W, White Metal/Anthracite Braided Cable/White Ceramic, Ø10 cm