SLV NUMINOS S PD DALI LED pendant light white/black 7.8 W 3000 K 1004446

SLV NUMINOS S PD DALI 1004446 is a slender LED pendant with a matt white body and a black finish around the light outlet. Its cylindrical housing hangs beneath a round ceiling canopy rather than a broad decorative shade. SLV identifies aluminium and polycarbonate as the fixture's materials.

A focused beam over a selected surface

The fixed 3000 K colour temperature produces warm white light. A 24° beam concentrates the output beneath the pendant, so this version is a directional choice over a kitchen island, a smaller table or a selected section of a counter. It should not be confused with a wide-distribution pendant intended to illuminate a whole room evenly.

Current SLV specifications state 1050 lm and a power consumption of 7.8 W. When arranging several pendants over a longer surface, consider their spacing together with the suspension height: narrow beams do not automatically cover the entire worktop. This variant does not switch between warm and cool colour temperatures.

Compact housing and a 250 cm cable

The cylindrical body is 6.5 cm in diameter and 16.2 cm high. The suspension cable measures 250 cm, while the canopy diameter is 10.3 cm. Compare these measurements with the ceiling height and the intended clearance above the illuminated surface. Cable length and housing height describe different parts of the installation.

The manual permits an electrician to shorten the cable during installation. This is a fixed ceiling-suspended fitting, not a track pendant. Its plain tubular outline and absence of decorative arms suit modern and minimalist interiors.

Control and servicing requirements

DALI 2 and Touch dimming are supported. The control installation must match these technologies; a DALI designation does not establish compatibility with every existing domestic wall dimmer. Mains connection requires a protective earth conductor, and installation must be carried out by a qualified electrician.

The light source and control gear are replaceable only by a qualified professional. Before cleaning, disconnect the fitting from the mains and allow it to cool. The manual recommends wiping external surfaces with a cloth lightly moistened with water.