STEINEL Dual US KNX V3.1 079604 is an ultrasonic presence detector for recessed ceiling installation. Its white plastic housing, specified as RAL 9010, contains a sensing system intended for long, narrow circulation routes. This is the KNX interface version, not a COM1 detector connected directly to the mains supply.
Detection along a corridor
The detection field measures 18 × 3 m. That elongated footprint suits corridors and passageways in office and administrative buildings. STEINEL specifies an installation height of 2.5–3.5 m, with 2.8 m identified as optimal. When planning detector positions, compare both the corridor layout and the actual ceiling height with these limits rather than relying on the maximum reach alone.
The 40 kHz ultrasonic technology can detect movement around obstacles, but does not penetrate them. It should not be understood as detection through walls. Electronic reach adjustment allows the monitored section to be matched to the passage instead of unnecessarily including adjoining areas.
Integration into KNX controls
The detector supports four lighting channels and an output for heating, ventilation and air conditioning. Available functions also include constant-lighting control, brightness information, a presence output and day/night operation. The twilight threshold is adjustable from 10 to 1000 lx. Settings can be configured through ETS software, the bus or compatible remote control; Smart Remote is an optional accessory.
Bus power and ceiling appearance
Article 079604 is supplied with 30 V through the KNX bus. It must never be connected to 230 V AC, and installation requires a qualified specialist. The unit is rated IP20 and is designated for indoor use. Its rounded square plate and projecting sensor body remain visible after installation, so this is not a completely flush ceiling fitting. The visible shape is functional rather than decorative.