Steinel XLED ONE is a white LED floodlight for a wall or ceiling: a flat aluminium panel behind a clear glass cover, held in a bracket that lets it swing through 180° vertically. This is the version without a motion sensor or twilight switch — it is switched by an ordinary light switch.
How much light, and what kind
The integrated LED module draws 17.8 W and gives 2050 lm, which is 115 lm/W. That is enough flux to light a driveway, an entrance or a yard in front of the house, and 3000 K means a warm white, softer than cold-white site floodlights. The colour rendering index is Ra 80. Neither the LEDs nor the driver can be replaced; the manufacturer gives an LED life of over 36,000 hours until output falls to 70% (L70B50 at 25 °C).
Where and how to mount it
Steinel intends the fitting for surface mounting on an outdoor wall or ceiling — around the house, in the yard and by the driveway — with an ideal mounting height of 2 m. IP44 means protection against splashing water from any direction. The fitting works at ambient temperatures from -20 to 40 °C.
The floodlight comes with a factory-fitted 1 m lead, so the connection is made in a junction box outside the housing, without opening the floodlight. It is a protection class I luminaire — it needs a protective earth — running on 220–240 V. A damaged lead is not replaced; the whole floodlight is replaced instead.
Size and construction
The panel measures 22.9 × 19.5 cm and the fitting projects 17.3 cm from the wall; with the panel swung to horizontal the projection grows to 31.6 cm. The housing is aluminium, the cover is glass, and the impact rating is IK03. The floodlight weighs 1.11 kg net.