ARGON Lagos 1476 ceiling spotlight bar, matt black with brass-coloured details, 3×GU10

Three black cylindrical spotlights share a slender rectangular base in the ARGON Lagos 1476. Gold-coloured joints provide a visible contrast and allow the heads to be aimed. The specified materials are painted steel and brass-plated steel; the metallic accents are a surface finish rather than a solid-brass body.

A 44 cm fitting with three adjustable heads

The overall width is 440 mm, with a maximum height of 145 mm and a depth of 90 mm. The mounting base measures 410 mm in the official drawing, so its footprint is not the same as the complete fitting's span. Allow for the projecting heads when checking the available ceiling or wall area. The drawing gives the cylinders a diameter of 50 mm.

Each head can direct its light towards a different part of the interior. This makes the bar useful for supplementary lighting across neighbouring areas without requiring all three beams to face the same way. The number of heads alone does not establish how brightly a whole room will be lit.

Check GU10 lamp dimensions as well as wattage

The installation sheet for article 1476 specifies GU10 LED lamps with a maximum rating of 5 W per light point. It also limits each lamp to 51 mm in diameter and 57 mm in height. Compare the proposed lamp's body dimensions with these limits before relying on the socket designation alone.

Light colour, output and beam angle depend on the chosen lamps. A narrower or wider beam changes the lighting distribution while the fitting stays the same. ARGON identifies studies, bedrooms and entrance halls as uses; directional heads can also supplement living-room lighting.

Ceiling or wall installation

Lagos 1476 can be installed on the wall as well as the ceiling. It operates at 230 V; the illustrated instructions show a protective-earth connection and installation with the power isolated. Tubular heads, exposed joints and the black-and-gold-coloured contrast suit modern, minimalist and industrial interiors. Wall mounting does not change the electrical requirements.