Endon Brio BRIO-3CH is a three-arm ceiling light with chrome-plated metalwork and three cylindrical shades in off-white fabric with a faux-silk appearance. Straight arms support the individual shades, while a vertical stem connects the fitting to its ceiling canopy. This semi-flush design has no long hanging cable, but it is not a flat, close-fitting disc.
Allow for its width and ceiling projection
The fitting measures 50 cm across and projects 46.5 cm down from the ceiling. Each shade is 13 cm in diameter. Compare both overall measurements with the intended position: the diameter describes the spread of the arms, while the projection determines how much clearance remains beneath the light. Semi-flush does not mean that the fitting will suit every low ceiling.
Brio can be considered for living-room, bedroom or dining-room ceiling lighting, including a position above a dining table. In a hallway or entrance, check the available headroom particularly carefully. Its separate pale shades and chrome arm structure suit classic and modern-classic schemes, rather than the appearance of a single enclosed ceiling shade.
Choose three replaceable E14 lamps
Endon specifies three 7 W E14 LED lamps, which are not included. You select the bulbs separately, so their brightness and colour temperature determine those aspects of the lighting. There is no fixed integrated LED module to dictate the choice. The illuminated photographs show an example, not a guaranteed colour temperature or lumen output.
The fitting is dimmable. If using LED bulbs with a dimmer, choose dimmable bulbs and a compatible control; the E14 cap size alone does not confirm that a bulb can be dimmed.
Installation and care
The instructions specify indoor ceiling use and exclude bathroom locations. Brio is a Class I fitting and requires an earth connection. Disconnect the supply before installation and use fixings appropriate to the mounting surface. The manufacturer advises cleaning with a dry cloth only, without liquid or abrasive cleaners. Switch off and allow the bulbs to cool before cleaning or replacing them.
