Norlys Lillehammer DC2293CG is an outdoor wall light with a plain rectangular body in cement grey RAL 7033. The cast aluminium housing is powder coated, and optical safety glass covers the light openings. This is the 24 V DC version and requires a separate power supply.
Two narrow beams on the wall
Two LED modules direct light upwards and downwards, with a 4° beam in each direction. This creates two narrow accents rather than a broad wash of light. Allow for that distribution when planning a sequence of lights on a façade: this version draws vertical lines of light along the wall.
The 2700 K light has a warm, slightly yellow appearance. The complete fitting delivers 31 lm at 7.2 W, while 1024 lm refers to the light sources before the optical system. When comparing wall lights, use the figure for the complete fitting and distinguish it from the output of the modules themselves.
Dimensions and wall mounting
The body is 18.5 cm high, 11 cm wide and projects 8 cm from the wall. Compare these dimensions with the space beside a window, doorway or edge of the façade. Mounting uses two Ø5 mm holes with 45 × 130 mm spacing.
IP65 means the enclosure is dust tight and protected against water jets for outdoor use. Its unadorned shape suits modern and minimalist façades.
Power supply and servicing
The LED modules are part of the fitting, so there are no separate bulbs to choose. You do need an external constant-voltage 24 V DC power supply; this class III fitting must not be connected directly to 230 V mains. The modules support dimming. Installation and servicing require a qualified professional, and the LED light sources can be replaced by a professional service technician.
Add your comment about Norlys Lillehammer DC2293CG outdoor LED wall light 2700K, 24 V DC, cement grey RAL 7033