Norlys Astrid 2213WH white LED bollard light 85 cm 4000 K

Norlys Astrid 2213WH is a white outdoor LED bollard measuring 85 cm high with a 14 × 14 cm cross-section. Vertical ribs continue along the body and frame the milky diffuser in its upper section. The housing is made from powder-coated extruded aluminium, while the diffuser is PMMA. This white finish is identified as RAL 9003.

4000 K light with phase dimming

This article is the neutral-white 4000 K version, rather than one of the warm-white alternatives. Its LED light source is included. The complete luminaire consumes 10.4 W and delivers 265 lm of diffuse light. That output refers to light leaving the finished fitting, not the higher figure quoted for the bare LED module. It is the relevant distinction when comparing the usable output of different garden bollards.

Brightness can be controlled through TRIAC phase dimming, using leading-edge or trailing-edge control. Plan for a compatible phase dimmer rather than treating this version as a DALI fitting. The installation instructions identify both the LED source and control gear as replaceable by a professional: integrated lighting here does not mean that the source can never be serviced.

A low-level element beside outdoor routes

At 85 cm tall, Astrid can form part of garden, terrace-edge or entrance-path lighting without becoming a tall lamp post. Compare its footprint with the available space and keep the walking route clear when planning positions. The white ribbed column suits modern, minimalist and Scandinavian settings. IP65 and IK10 specify the enclosure protection provided for outdoor use.

Prepare the mounting and supply

The bollard needs permanent fixing and a 220–240 V supply. Its mounting pattern has three 9 mm holes on a 65 mm pitch circle, spaced at 120°. Anchors and adapters are selected to suit the supporting surface and purchased separately. Fixing screws are not supplied. Installation and subsequent servicing must be carried out by a suitably qualified person.