Nowodvorski ZENITH L 8005 pendant light, black with brass, 50 cm Promo Code 🚀- NOVO15 until the end of Oct 25

Nowodvorski ZENITH L 8005 is a single-light pendant with a wide conical shade and a small brass detail at its apex. Black painted steel gives the shade a defined outline, while the solid-brass element breaks up the otherwise uniform finish. This black RAL 9005 version belongs to the ZENITH collection and measures 50 cm across.

Planning space around the shade

The open-bottom shade can be positioned over a dining table, a kitchen island or a defined part of a living room. Its cone conceals the light source from the sides while leaving the lower opening unobstructed. Simple geometry, a slender cable and a small brass accent suit modern and minimalist interiors. This is a single pendant rather than a multi-arm chandelier.

The manufacturer specifies a maximum overall height of 130 cm and a shade height of 35 cm. Compare these measurements with your ceiling height and the position of the surface below before installation. A half-metre-wide shade also calls for checking the clearance between its edge and neighbouring cupboards, rather than considering only the location of the ceiling connection.

Choose the bulb separately

The fitting has one light point for a GU10 R50 or GU10 ES111 source. No bulb is supplied. The maximum permitted rating is 20 W, LED only; this is not the consumption of a built-in LED module. Light colour, brightness and beam angle depend on the bulb selected, so compare those characteristics with the intended role of the pendant. A replaceable source allows these characteristics to be changed later without replacing the whole fitting.

Mounting and cleaning

The pendant attaches to the ceiling with a mounting bracket and operates on 220–230 V. Installation and electrical connection must be carried out by a suitably qualified person. Its net weight is 1.95 kg. The instructions recommend cleaning with a damp cloth only after switching off and allowing the fitting to cool. Keep moisture away from electrical connections and let the surfaces dry fully before switching it on again.