Pendant Light SLV Phelia Black E27 27.5 cm 133310

SLV PHELIA 133310 is a single pendant light with an aluminium shade that combines a conical lower section with a slim cylindrical neck beside the cable. Its black exterior and white interior identify the two-colour version of this family. The open underside provides direct downward light, making the surface beneath the fitting an important consideration when deciding where to install it.

A 27.5 cm shade above a table

The fitting measures 27.5 cm in diameter and its body is 32 cm high. These measurements describe the lamp itself, not the complete suspension. The pendant cable is 200 cm long. Compare all three measurements with your ceiling height, table width and the clearance you want above the tabletop before choosing the installation position.

The downward distribution supports use above a dining table or kitchen island, including a dining area within a living room or tables in a restaurant. The plain metal cone and absence of ornamental arms suit modern, minimalist and industrial interiors. This is a one-light pendant rather than a multi-arm chandelier.

Choose the E27 bulb separately

There is one E27 socket, and the bulb must be selected separately. SLV allows compatible LED and energy-saving lamps with this base, up to a maximum of 23 W. That figure is the fitting's permitted lamp wattage, not the consumption of every bulb installed in it. Both brightness and colour temperature depend on your chosen light source; the black shade does not determine whether the resulting light is warm or cool.

Ceiling installation and cable shortening

The round ceiling rose is intended for surface mounting on the ceiling. Installation requires an electrician and a protective earth connection. The manual permits shortening the pendant cable during installation, followed by correct reconnection and a check after shortening. This is not an everyday height-adjustment mechanism. Before replacing the bulb or cleaning, disconnect the supply and allow the fitting to cool. For care, the manufacturer specifies wiping the exterior surfaces with a cloth slightly moistened with water.