In this configuration the s.luce Ring is five LED rings in brushed aluminium, hung one below the other on a shared axis. The diameters run 40, 60, 80, 60 and 40 cm, so the set forms a vertical column of light that is widest in the middle. Each ring has a 1.3 × 3.3 cm profile, and the canopy matches the colour of the rings.
Dimensions and suspension
The largest ring is 80 cm across — that is the figure to compare with the width of a stairwell void, a gallery or the space above a table. The lamp arrives pre-assembled and ready to connect, and the length of each ring's suspension can be adjusted: the manufacturer intends it for rooms of ordinary height as well as for galleries and stairwells, at an overall height of up to 500 cm.
How much light, and what kind
Each ring has a built-in LED strip at 3000 K, a warm white, with a CRI above 95 — colours look natural under it. According to the manufacturer the Ø 40 cm ring gives 1350 lm, the Ø 60 cm ring 2070 lm and the Ø 80 cm ring 2700 lm, about 9540 lm for the whole set at a combined 120 W. That is main lighting for a large, tall space.
The light dims smoothly from 0 to 100% with a leading- or trailing-edge phase dimmer. With suitable drivers the manufacturer also allows control via s.luce ilight, Zigbee/Alexa, Casambi or DALI — that is optional equipment, not part of the set.
Light source, power and where it fits
The LED strips are included, and s.luce technicians can replace them — so the fitting is not thrown away when the source wears out. The manufacturer gives a 25,000-hour lifetime and 15,000 switching cycles. The fitting is protection class I, so it needs a PE earth conductor, and its energy class is F.
The manufacturer places it in living rooms, dining rooms and bedrooms, as well as hallways, stairwells and galleries — the vertical stack of rings works best where the lamp hangs in an open space through several storeys.