SLV ENOLA_B 151803 gold wall light, 2×GU10, up/down

SLV ENOLA_B 151803 is a gold wall light with a narrow cylindrical body and two GU10 sockets facing in opposite directions. Its construction combines aluminium and steel, and this version includes a gold decorative ring. The metal tube replaces a broad shade with a simple, clearly defined outline. Light sources are offered separately, so choose two suitable lamps to complete the fitting.

Separate light sources above and below

One lamp points upwards and the other downwards, allowing light to mark the wall on both sides of the body. This arrangement serves as supplementary wall lighting rather than a spotlight aimed at a worktop. Choose the light colour, brightness and beam width through the specifications of the GU10 lamps; the gold finish does not determine the colour of their light.

The manual permits up to 50 W per socket. SLV also lists compatible QPAR51 LED lamps. When choosing light sources, compare their dimensions and light distribution as well as the socket type. Replaceable lamps can be changed without replacing the complete wall fitting. Disconnect the power and allow the fitting to cool before changing a lamp.

A slender cylinder with a measurable projection

The body is 22 cm high and 6.8 cm in diameter, with an overall depth of 8.5 cm. Consider that projection when planning a position beside a walkway. In a hallway, corridor or staircase, leave room not only for the fitting itself but also for the light above and below it.

In a living room, bedroom or dining room, ENOLA_B can provide an additional layer of wall lighting. Its smooth cylindrical shape and lack of elaborate ornament suit modern and minimalist interiors. The gold surface remains a visible accent when the light is switched off.

Fixed installation and care

This is a surface-mounted wall fitting for permanent installation on a flat surface, with direct connection to a 220–240 V supply. Its Class I construction requires a protective conductor, and installation must be carried out by a qualified electrician. Clean the external surfaces with a cloth slightly dampened with water, after disconnecting the power and allowing the fitting to cool.