The VT-411CCT is a 10 W solar LED floodlight from V-TAC, housed in black ABS, PC and aluminium with an IP65 rating. The set includes the lamp, a separate solar panel, a remote control, mounting screws and a manual.
Mounting the lamp and the solar panel
The lamp and the solar panel are two separate units joined by a 5-metre cable, so the panel can be placed wherever it gets the most sun, away from the lamp itself. The lamp bracket rotates 360° and the panel bracket 270°, so each part can be aimed independently. The manufacturer recommends mounting at a height of 2–4 metres.
How much light it gives and how
The floodlight outputs 1500 lm at 150 lm/W, which the manufacturer states as roughly equivalent to a traditional 100 W bulb. Colour temperature is switched by remote between 4000 K (neutral white) and 6000 K (cool white). The beam angle is 120°x60°, and a built-in PIR motion sensor detects movement within 6 metres over a 120° range.
Power and working modes
The lamp runs on an 18650 lithium-ion battery rated at 3600 mAh — a full charge in strong sunlight takes 5–6 hours, and lighting time reaches up to 60 hours depending on the mode. The remote switches between two modes: Sensor Mode, where the lamp jumps to full brightness on motion and dims to 5% after 30 seconds without movement, and Keep Lighting Mode, which by default holds 60% brightness for 3 hours after dark before switching to Sensor Mode — lighting time (3, 5, 8 or 12 hours) and brightness (60%, 40% or 20%) can also be set manually. Warranty covers the lamp for 2 years, while the battery itself carries a 1-year warranty.
Where it is meant to be used
The manufacturer lists this floodlight for gates, driveways, gardens, walkways, parking areas and warehouse yards — anywhere without access to mains power where the lamp is meant to run from dusk to dawn.