V-TAC VT-2-16 white recessed LED downlight 16 W 4000 K 12° SKU 977

The V-TAC VT-2-16, SKU 977, is a square recessed downlight with a white aluminium body and four visible reflector cells. Integrated Samsung LEDs provide fixed 4000 K neutral-white light. Its narrow 12° beam makes this version a focused lighting element rather than a broad-spread ceiling panel.

A concentrated beam for selected details

The 16 W light source delivers 1280 lm through a narrow distribution. This suits highlighting a chosen part of a display or a particular area within an interior. When deciding where to place the fitting, consider the distance to the illuminated object: that distance affects the size of the light patch. The lumen figure alone does not tell you how much floor area can be lit evenly.

A CRI of 90+ is relevant when the colours of displayed objects matter. The 4000 K colour temperature is fixed, with no warm-to-cool selection. This fitting is also non-dimmable and does not rotate. Position the ceiling opening around the intended lighting target rather than relying on later adjustment of the beam.

Check the cut-out separately from the outer size

The fitting measures 93 × 93 × 47 mm and requires an 85 × 85 mm mounting opening. The frame size must not be used as the cut-out measurement. Check the available space for the body, driver and wiring as well as the opening itself. Product photographs show spring clips and a separate power supply, consistent with a recessed installation rather than a surface-mounted fitting.

The LED source is integrated, so there is no screw-base bulb to select separately. The supply rating is 220–240 V AC, and a quick connector is included. That connector is an installation component, not a lighting control. Electrical connection should be carried out by a suitably qualified person with the power disconnected.

A geometric fitting for residential and commercial interiors

The white square frame and divided reflector face complement modern and minimalist schemes. V-TAC lists residential and commercial areas, hotels, bars and showrooms as applications. In each case, plan this narrow-beam fitting as part of the lighting scheme rather than assuming it can provide all the room's general illumination. Its IP20 rating does not establish suitability for outdoor installation or locations exposed to water.