Brinova AQUA LUCE 2017423300000 is an oiled-oak wall light with a narrow, pale lighting element along its front. The rectangular wooden body leaves the grain visible rather than covering it with a decorative shade. This is the 59 cm version, fitted with one integrated LED light source.
A long body with a narrow profile
The longest side measures 590 mm, while the other dimensions are 50 and 55 mm. Both the photographs and the manufacturer’s drawing show the lamp vertically, with a long lighting element alongside the wooden body. Before buying, compare the body length with the available wall area and the position of the electrical outlet. A narrow cross-section does not remove the need for nearly 60 cm of clear wall along the lamp.
Warm-white LED is already included
The LED source is part of the fitting, so there is no separate bulb to select by socket type. The manufacturer specifies 9 W, a luminous flux of 627 lm and a warm-white colour temperature of 3000 K. The pale front element forms an elongated luminous surface, and the documentation describes the light output as direct. It can supplement lighting at a wall; these figures should not be turned into a promise that one fitting will light an entire room.
The LED 24 V designation refers to the integrated source. For the complete fitting, the declared mains input is 220–240 V AC. Keep these two specifications distinct when planning the electrical connection.
Oak for bathroom interiors as well
The manufacturer also identifies bathrooms as an application for the AQUA LUCE family, and this exact version is rated IP44. The installation position must still meet applicable requirements: IP44 does not permit unrestricted placement near water. Living rooms, bedrooms, hallways and hotel interiors are further possible settings. Natural timber and simple geometry support modern, minimalist and Scandinavian interiors. The exact product sheet confirms Polish manufacture and a five-year guarantee.