Brinova's Dreva wall light pairs a round oiled-oak base with a black fabric shade. A short connector separates the shade from the wooden disc, while the angled cylinder gives the fitting its distinctive outline. This particular version has one E27 socket and the shade identified by the manufacturer as A1122.
A wooden base with a contrasting shade
The grain remains visible on the oak base rather than being covered by the shade's black finish. The plain cylindrical shade has a light-coloured interior visible at its opening. Its unornamented geometry and combination of wood and textile suit modern and Scandinavian interiors. When coordinating the fitting with existing furnishings, you can pick up either the timber tones or the black details without making every surface match.
Check the wall space, not just the photograph
The product sheet lists an overall height of 20 cm, width of 25 cm and length of 13 cm. The drawing also identifies the component sizes: the shade is 15 cm long and 13 cm in diameter, while the circular base is 10 cm in diameter and 2.5 cm thick. Compare these measurements with the available wall area and the position of nearby furniture before choosing the mounting point.
Wall mounting provides an additional light in a living room or bedroom without occupying a tabletop. Dreva can also serve as a supplementary fitting in a hallway or corridor. Allow for the angled shade when deciding how it will sit in relation to the usual viewing position.
Choose the E27 lamp to suit your needs
The fitting takes one E27 bulb rated at no more than 25 W. Colour temperature and luminous flux depend on the bulb selected; neither can be established from the black shade alone. Check the bulb's physical size against the shade as well as its cap and wattage. Documentation for this exact version specifies a 220–240 V supply and a five-year manufacturer's guarantee.