Endon Welles Semi-Flush Ceiling Light, 3×E27, Antique Brass and White Glass, 41 cm

Endon Welles WELLES-3AB is a semi-flush ceiling light with one broad, bowl-shaped shade and three E27 lamp holders. White-painted glass with a faint line pattern is paired with a steel frame finished in antique brass.

Measure the bowl and the ceiling drop

The fitting is 41 cm across and projects 35 cm below the ceiling. That second measurement is the overall ceiling-to-bottom distance, not the depth of the glass shade alone. Mark out both dimensions at the proposed mounting point, particularly where people will walk beneath it or tall doors open nearby.

Endon identifies Welles as suitable for low ceilings. Its short curved supports leave a visible gap above the bowl without the long suspension of a pendant. The form can provide general lighting in a living room, bedroom, dining room, entrance hall or corridor. Choose the lamps for the actual room size rather than assuming that the number of holders guarantees sufficient brightness.

Three separately purchased LED lamps

The fitting takes three E27 LED lamps, each rated at no more than 10 W. Bulbs are not supplied. All three holders sit within the same shade, so the three-light specification does not mean three separate glass bowls.

The bulbs you select determine the light colour and brightness. Dimming requires dimmable lamps and a dimmer compatible with those lamps. Check the combination before purchasing: a dimmable fitting does not make an ordinary non-dimmable LED bulb adjustable.

Finish, connection and care

The antique-brass ceiling plate and lower metal finial frame the white bowl with matching accents. Fine lines on the glass add detail to its otherwise simple silhouette. This combination supports a classic or modern-classic interior without the exposed branches of a chandelier.

This is a Class I fitting requiring an earth connection and a 220–240 V supply. The installation instructions exclude bathroom use. Clean with a dry cloth only, without liquid or abrasive cleaners. Isolate the supply before maintenance or bulb replacement and allow the lamps to cool before handling them.