LED PRO B 2-pin connector for single-colour 10 mm LED strips, one-sided with cable

LED PRO B connector for 10 mm strips

PRO B is a one-sided connector with a cable for 10 mm single-colour LED strips. It uses a 2-pin connection and is intended to link an LED strip to its power supply. The cable is 15 cm long and has a 2 × 0.3 mm² cross-section.

Solder-free fitting

PCB-piercing contacts make a click connection, so the strip does not need to be soldered. An opener helps when closing or reopening the connector during installation. The transparent component is specified by the manufacturer as polycarbonate and copper.

Specifications and selection

• for 10 mm MONO strips,
• 5 / 12 / 24 V DC,
• maximum current 2 A,
• connector dimensions 22 × 14 × 7 mm.

The connector may be used with IP20 and IP65 strips. With an IP65 strip, the connection itself must be sealed to retain the protection level of the installation. Before fitting, check the strip width, the two contact pads, and voltage compatibility between the strip and the power supply.