NORLYS Asker 1339BL LED Bollard Light Black 4000K IP65 PIR Sensor

NORLYS Asker 1339BL is a black LED bollard light with a PIR motion sensor. A narrow upright body supports a projecting rectangular head, giving the fixture a simple, angular outline. Its cast-aluminium housing is powder-coated in RAL 9005, while the transparent polycarbonate cover has a textured surface and UV stabilisation.

Downward light at bollard height

This version delivers diffuse downward light in neutral white at 4000 K. The complete luminaire produces 640 lm; the separate figure of 1150 lm describes the LED module itself, not the light leaving the finished fixture. When comparing garden lights, use the luminaire output rather than treating these two figures as interchangeable. Total fixture power is 9.7 W.

At 85 cm high, Asker can be considered for garden paths, terrace edges and driveways. Its downward distribution and the actual layout of the site should guide positioning. A lumen figure alone cannot establish the spacing needed between several bollards. The straight surfaces and absence of decorative detailing suit modern and minimalist outdoor schemes.

Motion sensing and factory settings

The PIR detector works with a twilight switch and a motion-related hold function. NORLYS specifies factory settings of maximum sensor range, a one-minute lighting time and a twilight threshold of 10 lx. Basic movement detection is already part of this version, rather than requiring a separate detector to be purchased. The manufacturer offers other settings by arrangement with its sales department; this should not be taken to mean that every adjustment is available without additional equipment.

Plan the fixing before installation

The head is 20 cm wide and 11 cm deep. An IP65 rating supports outdoor use, but the light requires a 220–240 V electrical supply and the protective-earth connection appropriate to Class I. Four mounting holes are 8 mm in diameter, with 18 × 50 mm spacing. Anchors and other installation accessories are sold separately, so choose the fixing method to suit the supporting surface before ordering. Installation and replacement of the integrated LED light source must be carried out by an appropriately qualified professional.