Norlys Kisa 5186GR — 85 cm graphite LED bollard, 3000 K, DALI2

Norlys Kisa 5186GR is a cylindrical aluminium bollard in graphite RAL 7016, with two opposing light panels made from satin PMMA. Its double-sided distribution is intended for gardens, private grounds and public spaces.

An 85 cm bollard for outdoor layouts

The fitting stands 85 cm high and has a diameter of 12 cm. Its narrow upright body has a small footprint, but the space beside the intended circulation route and a suitable mounting surface still need to be checked. As light leaves from two opposite sides, the orientation of the bollard determines how both illuminated panels serve the surrounding area.

The body is powder-coated cast aluminium. Its plain, unadorned cylinder suits modern and modernist settings. It can form part of the outdoor lighting around a hotel or restaurant as well as a private garden.

Warm white light on two sides

This version produces warm white light at 3000 K. Satin PMMA diffusers spread the light from six LED modules, supplied together with the driver. There are no separate screw-in bulbs to select or buy for the fitting.

The complete luminaire consumes 27 W and delivers 2432 lm. This is the light leaving the fitting, making it the relevant figure when comparing outputs and planning the number and spacing of bollards. It does not define a fixed coverage area: the layout of the site and the orientation of both panels must also be considered.

Controls and preparation for installation

The driver supports DALI2 and NightDim. It is supplied programmed for maximum current, with further settings agreed with Norlys. The LED modules and control gear can be replaced by professional service personnel, allowing maintenance access to be considered when planning the installation.

The mounting arrangement has three holes of 9 mm diameter, spaced at 120° on a 65 mm diameter circle. Other mounting accessories are purchased separately. IP55 describes protection against dust and water jets, while IK08 specifies impact resistance. This class I fitting requires a protective earth connection and installation in accordance with the supplied instructions.