NORLYS Lillehammer 2272GR outdoor wall light, graphite, LED 4.5 W 3000 K, downlight, DALI2

Lillehammer 2272GR is an outdoor wall light shaped as a rectangular box of cast aluminium, powder-coated in graphite RAL 7016. Light leaves through a clear safety-glass window in one direction only — downwards, in a 60° beam. The fitting is controlled over DALI2.

Size and mounting

The light is 18.5 cm high and 8 cm wide and projects 11 cm from the wall, so it fits on a narrow strip of facade between windows or beside a door. It weighs 1.6 kg and fixes through two ø5 mm holes spaced 45 × 130 mm apart.

The terminals take five conductors up to 1.5 mm², enough for live, neutral, earth and the DALI control pair, and the next fitting is fed on in a loop. The gland takes round cable 7–10.5 mm in diameter. According to the manufacturer's card, up to 74 of these lights can run on one B16 circuit breaker. The fitting is protection class I, needs an earth conductor and must be installed by a qualified electrician.

What light it gives

The source is an integrated Cree LED module with a DALI driver included, at 3000 K warm white and CRI 80. The fitting draws 4.5 W and emits 112 lm — accent light that draws a bright wedge on the wall below the fitting and marks an entrance rather than lighting a whole yard. ULOR is 0%, so no light escapes into the sky.

DALI2 is digital control: dimming and scenes are set from a DALI controller, not from an ordinary wall dimmer. This is the fitting to choose when the facade already has a DALI bus or when you plan to control a group of wall lights centrally.

Lifetime and service

The LED module and the driver are replaceable by a professional service, and the manufacturer stocks a service kit for this fitting as a spare part. The card gives a module lifetime of L80 over 102,000 h and L90 over 52,600 h, and 50,000 h for the driver. IP65 means dust-tight and protected against water jets, and IK08 means resistance to a 5 J impact. The light is intended for lighting walls and facades.