Nowodvorski FOURTY ROUND LED 12284 pendant light – beige, 80 cm, 7×GU10 R35 + LED

Nowodvorski FOURTY ROUND LED 12284 is a beige pendant light built around an open circular ring with seven adjustable spot heads. Painted aluminium and steel form the structure, while the small cylinders leave the centre of the ring unobstructed. This version combines replaceable GU10 R35 lamps with a separate integrated LED layer directed upwards.

Seven spots, plus an independent upper layer

The lower heads require seven GU10 R35 LED bulbs, rated at no more than 10 W each. These bulbs must be bought separately. Check the R35 designation rather than choosing by the GU10 cap alone: the bulb also needs to fit the narrow head. Replaceable lamps let you select the light characteristics for this part of the fitting without replacing the complete pendant.

Each head can turn through up to 345° horizontally and 90° vertically, so the individual beams do not have to share one direction. The integrated upper LED section uses 9 W and provides a colour temperature of 3000 K. The manufacturer specifies independent operation of the two sections and dimming of the upper LED layer. The stated total of thirteen light points refers to the 7/6 arrangement, not thirteen bulbs that need to be purchased.

Planning the space above a round table

The ring is 80 cm wide, with an overall suspension height of up to 160 cm. Compare these measurements with the tabletop and available ceiling clearance before installation. The manufacturer identifies dining rooms, round tables and living areas as intended settings. Directed spot lighting and light reflected from the ceiling have different roles; the upper layer should not automatically be treated as a substitute for illuminating the table itself.

Beige geometry and installation

The plain ring and compact cylinders suit modern and minimalist interiors, while the rounded structure also draws on design from the 1960s and 1970s. Colour P038 gives this version its beige finish. Installation uses a mounting bridge and suspension wires. The package contains the fitting and instructions; electrical connection should be carried out by a qualified installer. Clean the surface only after switching off and allowing it to cool, keeping moisture away from electrical connections.