PINNE 200 is a linear pendant luminaire by the Polish manufacturer Thoro — a two-metre rectangular aluminium profile finished in grey and suspended on two thin steel cables. The built-in LED module draws 50 W, delivers 6500 lumens of neutral 4000 K white and directs all of it downwards, onto the worktop, table or desk below.
Two metres of unbroken light
At 200 cm long and only 6 cm wide, the fixture draws a single continuous line across the room instead of scattering several separate pools of light. That proportion suits a long dining table, a kitchen island, a reception desk or a row of workstations — one luminaire covers the full length of the surface and leaves no shadowed ends. The cable suspension is adjustable down to 150 cm from the ceiling, and both the power cable and the ceiling rose share the grey finish of the profile, so nothing breaks the line visually.
4000 K colour temperature, CRI 90
Neutral white at 4000 K is a working light: it has neither the yellow warmth of candlelight nor the bluish edge of technical lighting. It belongs wherever something has to be recognised, measured or read — a kitchen, a studio, a desk. A 3000 K version of PINNE 200 is available if the room calls for a distinctly warmer tone.
The colour rendering index is CRI 90, above the CRI 80 that is typical in this class of LED fixture. In practice, wood grain, fabrics, paint and food keep their true colour instead of turning grey or drifting towards green, as they do under cheaper modules.
Efficiency and running cost
6500 lm from 50 W works out at roughly 130 lumens per watt — an efficacy figure from the office-lighting shelf rather than the decorative one. PINNE 200 lights an area that would normally take several smaller fittings, at a power draw comparable to a single old halogen bulb. The declared energy efficiency class is C; the EPREL registration number is 1860737.
Installation and safety
The luminaire is rated IP20 and is intended for dry interiors only — not for bathroom splash zones and not for outdoor use. It is a class I fitting, so the installation must provide a working protective earth (PE) conductor and the connection should be made by a qualified electrician. The LED module is permanently integrated; there is no bulb to replace, and the light source is supplied with the lamp.
Specifications
- Type: linear pendant lamp, 1 light point
- Dimensions: length 200 cm, width 6 cm, maximum suspension height 150 cm
- Material: aluminium, grey (profile, cable and ceiling rose)
- Light source: integrated LED, included
- Power: 50 W
- Luminous flux: 6500 lm
- Colour temperature: 4000 K (neutral white)
- Colour rendering index: CRI 90
- Energy class: C, EPREL 1860737
- Supply: ~230 V, 50 Hz
- Ingress protection: IP20 (dry interiors)
- Protection class: I
- Light direction: downwards
- Net weight: 4.35 kg
- Warranty: 5 years
- Made in: Poland
Thoro manufactures in Poland and backs its fixtures with a five-year warranty. PINNE is a whole family of luminaires in 67, 90, 117, 150 and 200 cm lengths, as pendant, ceiling and wall versions, in white, black and grey — enough to light several rooms in one consistent language.
Add your comment about Pendant lamp PINNE 200 grey 4000K Thoro