The Antigo Yabu K1 7749 is a white wall light shaped as a long, narrow tube with a small wall bracket. Its painted steel body stands 70 cm high, with light sources at opposite ends. This is an up-and-down spotlight arrangement, not a continuous luminous strip running along the tube.
Check the bulb format as well as the cap
Antigo specifies two MR11 LED bulbs with GU10 caps, each rated at no more than 4 W. Check both designations when choosing replacements. GU10 alone does not define the reflector's overall size; the slim housing requires the specified MR11 format. A larger reflector bulb is not automatically suitable just because its cap matches.
Light leaves the upper and lower ends of the fitting. Colour temperature, brightness and the detailed beam depend on your selected bulbs. The white finish does not prescribe a particular light colour. The arrangement can provide an accent on the wall, but does not guarantee even facial illumination beside a mirror or enough light for an entire room.
A tall line with a narrow profile
The manufacturer's drawing gives a height of 700 mm and transverse dimensions of 40 and 60 mm. Compare the full height with the available wall space beside a mirror, doorway or fitted furniture. Also allow access to the ends as shown in the installation instructions. The plain cylindrical form suits modern, modernist and minimalist schemes where a slender vertical line is preferable to a projecting decorative shade.
IP44 and a fixed electrical connection
The Yabu K1 operates on ~220–230 V and carries an IP44 rating. The manufacturer's symbols identify it for indoor and outdoor use; a bathroom wall or facade can be considered subject to the installation rules for that location. IP44 does not permit immersion or unrestricted positioning within a shower area. The instructions show wall mounting and a protective-earth connection, so the electrical installation should be carried out by a suitably qualified person.