Zambelis 22181 is a single LED pendant with a narrow black body and a short painted-gold cylinder at its lower end. Its metal and aluminium construction pairs a sandy-black finish with a clearly defined gold accent, rather than a large shade suspended above the surface below.
Plan the drop separately from the body size
The light-emitting body measures 16 cm high and 7 cm in diameter. These are body dimensions, not the overall height including the suspension. The ceiling canopy is 8 cm in diameter and 3.5 cm high, so compare its footprint with the position of your ceiling wiring before installation.
The manufacturer specifies an adjustable 200 cm fabric cable. The suspension can therefore be set during installation to suit a dining table, kitchen island or bedside table. Use the actual height of the surface and the clearance required beneath the fitting when planning the drop; the small body height alone does not establish the installed height.
A directed pool of warm-white light
The built-in 7 W LED produces warm-white light at 3000 K. Zambelis lists a luminous output of 840 lm and a beam angle of 36°. Those figures point to a focused lighting role over a chosen area rather than broad illumination throughout a room.
For a long table or island, plan the positions of the lighting points against the dimensions of the worktop. A single narrow pendant should not be assumed to light the whole surface evenly. There is no separate screw-in bulb to select because the LED source is integrated. This version is non-dimmable, an important distinction when choosing the lighting controls.
Black-and-gold geometry with fixed ceiling mounting
The vertical silhouette and restrained gold section suit modern and minimalist interiors. In a living room, bedroom, dining space or hotel, the pendant can provide local lighting alongside the room's general lighting.
The fitting is intended for indoor ceiling installation. Its instructions exclude outdoor use and wet conditions. Installation and electrical connection must be carried out by a qualified electrician with the mains supply switched off.