Britop Lighting Netuno 92013351 is a square ceiling light made from stained pine and metal. Three black lamp holders sit beneath the wooden base, surrounded by an open gold-coloured cage of slender rods. The bulbs remain visible, making their shape part of the fitting's appearance even when switched off.
A square footprint rather than a hanging shade
The base measures 34×34 cm. When planning its position, allow for both sides of the square and its alignment with the room, rather than treating 34 cm as the diameter of a round shade. The wooden plate gives the fitting a defined outline, while the cage leaves the area around the bulbs open.
This is a ceiling-mounted design without a long suspension. Consider it for a hallway, bedroom or general lighting in a living area. In a dining room it stays at ceiling level rather than hanging low over the table. That distinction matters when comparing it with a pendant intended to form a lower focal point.
Three E27 positions for LED bulbs
The manufacturer specifies three E27 LED light sources, each rated at no more than 15 W. The limit applies to each bulb individually, not to the combined rating of all three. Check the bulb envelope against the space inside the metal cage as well as checking the cap: an E27 connection alone does not establish the bulb's overall size.
Brightness and colour temperature depend on the light sources selected. The gold-coloured cage does not specify a warm light output, and the decorative bulbs shown in the photograph are not a fixed lumen or colour-temperature specification.
Visible timber grain and exposed fittings
Stained pine, black holders and gold-coloured rods give Netuno a distinct combination of surfaces. The open cage suits industrial and loft schemes, while the timber base can connect with rustic furniture. Exposed bulbs also provide a vintage reference. For a coordinated lighting scheme, compare the wood and open construction as well as the metallic colour.
Add your comment about Britop Lighting Netuno 92013351 ceiling light, 3×E27, stained pine, black and gold, 34×34 cm