Rena 1769GR is a round drive-over light set into the ground, with a 13 cm diameter front of cast aluminium powder-coated in graphite RAL 7016. The top of the fitting is closed by a cross-shaped cover, and the light leaves through four side openings and a satin diffuser of UV-stabilised polycarbonate. Below the surface the body reaches 18.2 cm deep.
Where it can be installed
Vehicles on pneumatic tyres may drive over the light, and Norlys rates the fitting for a load of up to 1000 kg. The manufacturer rules out traffic lanes, where hard braking, acceleration and changes of direction would push the light sideways. Rena 1769GR therefore belongs on a driveway, a path or the paving in front of a house, hotel or restaurant entrance, not on a road. Protection rating IP68 (immersion down to 1 m) means water standing on the paving after a downpour does not harm it.
What light it gives
The integrated 4 W LED module produces 488 lm, but with the cover closed on top 19 lm leave the fitting at a consumption of 4.2 W. This is an orientation light: low above the paving it marks the edge of a driveway or path and shows the way, without lighting up the area or glaring into anyone's eyes. The 4000 K colour temperature is a neutral white, and the colour rendering index is Ra 80.
The fitting can be dimmed with a phase dimmer, either trailing edge (TE) or leading edge (LE). Only a professional service may replace the LED module, and the manufacturer gives its life as more than 59,000 h until the output falls to 70 %.
Installation and connection
The mounting box is set into the ground as described in the instructions, and the light comes with an H05BQ-F 3G1 cable. The junction boxes 145ZX0009 and 146ZX0009 are bought separately and are useful when several lights are joined into one circuit. This is a protection class I fitting, so the installation needs a protective earth conductor.