Endon Chryla 3 Light Chrome Crystal Ceiling Light 30.5cm IP44 60103

Endon Chryla 60103 is a round flush ceiling light with chrome-plated metalwork and a hemispherical shade made from clear faceted crystals. Small circular settings form a regular pattern across the shade, giving the fitting a defined decorative surface even when switched off. Its steel and crystal-glass construction suits glamour interiors that use polished finishes and detailed lighting as part of the room's design.

A crystal shade without a hanging drop

The fitting measures 30.5 cm in diameter and projects 13.5 cm from the ceiling. There is no suspension cable or chain below the ceiling base: the curved crystal section sits directly beneath it. Compare both measurements with the space around your proposed lighting point before ordering.

Consider Chryla for ceiling lighting in a living room, bedroom, dining room or hallway when you want a decorative crystal fitting rather than a suspended chandelier. The compact outline keeps the ornament close to the ceiling. Its chrome rings and clear crystals can be coordinated with other polished details without introducing a coloured shade.

Choose three G9 bulbs separately

Three replaceable G9 bulbs are required and are not supplied. Endon specifies a maximum of 18 W per bulb and confirms compatibility with suitable G9 LED lamps. The bulbs you choose determine the colour temperature, brightness and actual energy consumption; those properties are not fixed by the crystal shade.

Dimming requires dimmable bulbs and a dimmer compatible with them. A dimmable fitting alone does not make every LED bulb dimmable, so select the light sources and controls together if you intend to adjust brightness.

Bathroom placement and care

This indoor fitting has an IP44 rating. Endon permits installation in bathroom zone 2 and specifies a 30 mA RCD for zone 1. Have an electrician check the position against local installation rules. The Class I construction must be earthed.

Partial assembly is required. The instructions specify a dry cloth only, with no liquid or abrasive cleaners. Disconnect the power and allow ten minutes for cooling before cleaning or changing bulbs.