LED bollard light NORLYS Egersund Park 6091GR graphite RAL 7016 85 cm 4000 K

The Egersund Park 6091GR is a round garden bollard, 12 cm in diameter and 85 cm high, in powder-coated cast aluminium finished in graphite RAL 7016. The top 33 cm is a clear PMMA cylinder closed by a flat cap, with a thin rod running down its centre; below it sits the solid graphite body.

What light it gives

The integrated LED module delivers 935 lm from the fitting at 9.1 W, at 4000 K, a neutral white, with CRI 80. The light spreads symmetrically around the bollard and is directed downwards: the manufacturer states a ULOR of 1%, so almost nothing goes above the horizontal. The same fitting at 3000 K is model 6090.

The bollard can be dimmed with a trailing-edge (TE) or leading-edge (LE) phase dimmer. The LED module and driver are replaced by a professional service using the ZS6091 repair kit, and the manufacturer rates the module at more than 102,000 h (L80).

Installation

The bollard is bolted down with three bolts through ø9 mm holes spaced at 120° on a ø65 mm circle. Foundation parts are bought separately: the 205ZX concrete anchor, the 206GA ground anchor or the 206GA0S concrete-foundation adapter. The bollard weighs 4.85 kg.

The terminals take conductors up to 2 × 4 mm² and allow the next bollard to be looped through, and the gland accepts a round cable of 8–12 mm or 10–14 mm in diameter, so a row of bollards along a path runs from one supply line. The luminaire is protection class II and needs no protective earth, is sealed to IP65 (dust-tight, protected against water jets) and has IK08 impact resistance.

Where it fits

The Egersund Park is intended for gardens, terraces, driveways and residential streets, and for the grounds of hotels and restaurants. Its modern character comes from the plain cylinder with a clear upper section through which the inner rod is visible.