The Bologna 361WH is an outdoor wall light with an opal globe 25 cm across, set in an open-work cast cage above the arm. A curved decorative strut supports the arm from below and a turned finial hangs under the cage – the shape of a classic lantern. The body is cast aluminium powder-coated white (RAL 9003), the globe opal PMMA plastic.
Size and mounting
The light is 48.5 cm tall and projects 34.5 cm from the wall; the backplate is 23 cm high. Compare the projection with the space by a door or window, where the globe should not get in the way of an opening leaf. It weighs 1.8 kg and is screwed on through four ø5 mm holes spaced 25 × 140 mm. The terminals take conductors up to 2 × 2.5 mm², and the EPDM gland seals a round cable 5–12 mm in diameter – worth checking on the cable coming out of the wall. On a building corner the light goes on the corner bracket art. 152, sold separately.
What light it gives
The cage holds one E27 socket for a pear-shaped A55–A60 lamp, and the manufacturer allows an LED source of up to 9 W. The lamp is not included; the user replaces it. To order, Norlys supplies the light with a Philips Master LEDbulb 806 lm / 8.5 W / 2700 K – the brightness of an old 60 W bulb in a warm, slightly yellow tone. That lamp is dimmable, but the fitting has no driver of its own, so dimming depends on the lamp and the dimmer.
The opal globe diffuses the light in every direction, so from outside you see an evenly glowing ball rather than a bright bulb point, and the light also reaches the façade around it, not only the area below.
Use outdoors
IP54 means protection against dust and against water splashed from any direction, so the light can hang on a house façade or at the entrance of a hotel or restaurant. A silicone gasket seals the globe, and the manufacturer gives an operating range of −20 to +45 °C. The fitting is protection class II, so it needs no protective earth. The globe is available as a spare part (service kit 06360007), and Norlys makes the same shape in black as 361BL.