Zambelis 25376 matt white LED ceiling light 40 cm 28 W 3000 K Promo Code - ZAM10 until the end of Oct 30

Zambelis 25376 is a round ceiling fitting with a matt white rim and a pale acrylic diffuser across its underside. The aluminium body forms a shallow cylinder, with no hanging cable, ornamental arms or exposed bulb. Its modern, minimalist appearance comes from that simple geometry rather than decorative detailing.

A 40 cm fitting close to the ceiling

The light measures 40 cm in diameter and 7 cm high. Compare its footprint with the available ceiling space and the position of the electrical connection before choosing a location. Unlike a pendant, it does not require room for a suspension, although its own depth still needs to be allowed for when checking headroom.

The manufacturer identifies living rooms, kitchens, bedrooms and commercial interiors as applications. Its shallow form can also be considered for general lighting in a hallway or corridor. The white housing and continuous circular front suit interiors where the ceiling should remain visually restrained. The number of fittings needed depends on the room's size and layout.

Warm-white LEDs and TRIAC dimming

The built-in LED source uses 28 W and delivers 1568 lm at 3000 K. This means a fixed warm-white colour temperature, rather than a colour selected through a separately purchased bulb. CRI 85 describes colour rendering; it should not be confused with brightness or a guarantee of how an entire room will be lit.

The fitting supports TRIAC dimming. If adjustable brightness is required, select compatible controls rather than assuming that any dimmer will work. The acrylic diffuser covers the integrated LEDs and creates a broad luminous face instead of a single exposed light point.

Connection and future servicing

This is an indoor fitting for a 220–240 V supply. The instructions describe fixing the frame to the ceiling, connecting the supply at the terminal block and securing the diffuser. Installation and maintenance must be carried out by a professional electrician with the power switched off. Do not cover the luminaire. The integrated source is not an ordinary replaceable bulb: the manufacturer specifies that replacement must be performed by the manufacturer, its service agent or a similarly qualified person.