ASKER Pole PRO 5161AL garden / park lighting pole aluminium LED 8W 4000K 216 cm - NORLYS

ASKER POLE PRO 5161AL is a complete 216 cm lighting pole: a two-segment column of extruded aluminium profile, topped with a horizontal arm carrying a downward-facing LED luminaire. The finish is aluminium RAL 9006, powder-coated; the lens is clear PMMA.

Dimensions and mounting

The pole is 216 cm tall, and the luminaire arm projects 39 cm with an 11 cm cross-section. The 24 cm base plate has four ø12 mm holes on a 200 × 200 mm pattern — the light is bolted to a foundation or an anchor. The ground anchor (117GA0009) and other accessories are sold separately.

The luminaire weighs 10.54 kg and the carton measures 115 × 56 × 25 cm. The manufacturer gives a side area of 0.232 m², the figure that determines wind load when sizing the foundation.

What light it gives

The integrated LED module draws 8 W and the luminaire delivers 1186 lm of neutral white 4000 K light. A Ledil IESNA type V lens spreads it widely and symmetrically around the pole — the manufacturer intends it for lighting paths, walkways and park areas. A ULOR of 0.85% means practically no light escapes upwards, so the pole does not shine into windows or the sky.

Colour rendering is CRI 70: enough for safe movement, but plants and façades look less natural than under Ra 80–90 sources. The luminaire is not dimmable.

Electrical installation

The pole runs on 220–240 V and is protection class I, so it needs a protective earth conductor; installation is done by a qualified person. The terminals take conductors up to 3 × 4 mm² and allow further luminaires to be looped through, and the cable gland accepts cables from 4 to 13.6 mm in diameter.

For a longer run, check how many fit on one circuit: the manufacturer gives a maximum of 31 per B 10A breaker, 50 per B 16A, 52 per C 10A and 85 per C 16A. The housing is sealed to IP65 and impact-rated IK08.