Mantra Sabina 6180 E27 wall light with beige fabric shade and wood-effect finish

Mantra Sabina 6180 is a wall light with a beige fabric shade and a metal structure finished to resemble wood. Below the shade, irregular branch-like elements form a tied bundle, supported from a circular wall plate. José Ignacio Ballester's design pairs the simple shade with a distinctly decorative lower section.

Wood-effect finish on a metal structure

Mantra specifies iron and fabric for this version. The wood-like grain is a finish rather than evidence of solid timber construction. When coordinating the light with furniture, distinguish its appearance from its material: the photographs show the tone and surface texture, while the specification identifies the underlying structure.

The visibly woven beige shade and branching silhouette suit rustic and boho interiors. The fitting can provide supplementary wall lighting in a living room, bedroom or dining room. It has no movable arm for aiming the light, so its fixed shape matters when deciding where to install it.

Allow space below the shade

The complete fitting measures 65.6 cm high and 20 cm wide, with a projection of 23.7 cm from the wall. Its decorative section extends well below the shade. Plan for the full height rather than measuring only the upper part of the lamp. The dimension drawing also shows a circular mounting plate with a diameter of 12 cm.

In an entrance hall or corridor, compare that projection with the clear walking space and the swing of nearby doors. In a bedroom, check the clearance between the lower elements, the headboard and other furniture. The height is not adjustable; the mounting position determines where the whole fitting sits.

A separately purchased E27 bulb

Sabina has one E27 socket and does not include a bulb. The installation instructions for reference 6180 specify a maximum of 40 W. Brightness and light colour depend on the bulb you select, rather than on the beige shade alone. Mantra lists the fitting as non-dimmable.

The instructions show wall mounting and connection to the electrical installation. Switch the light off before replacing the bulb and wait until the bulb has cooled. This version is intended exclusively for indoor use.