Lucide FOSKAL 79177/12/31 white LED ceiling light 12 W 900 lm 2700 K Ø34.5 cm

Lucide FOSKAL 79177/12/31 is a round white ceiling light made from matt spray-painted metal. Its integrated LED uses 12 W, produces 900 lm of warm 2700 K light and distributes it through a 120-degree beam.

Diffuse light from a shallow metal form

A 34.5 cm circular disc surrounds the central section and sends light around the fitting in a diffuse pattern. It is not directional, so it is intended to provide broad illumination rather than a narrow accent. The 7.3 cm height keeps the profile close to the ceiling. White matt metal can visually blend with a light background, while the circular outline remains defined with the light switched both on and off. No sensor or adjustable head changes the distribution.

12 W, 900 lm and fixed 2700 K

The integrated LED module is rated at 12 W and 900 lm, with a fixed 2700 K colour temperature and CRI 80. Lucide specifies 20,000 operating hours and 10,000 switching cycles. Colour temperature is not adjustable and neither the source nor fitting is dimmable. Energy class G applies to the built-in source. These figures belong to exact variant 79177/12/31, identified by EAN 5411212791276; black and brass versions have separate article numbers.

Dimensions, weight and installation parts

The body measures 34.5 × 34.5 × 7.3 cm and weighs 1.28 kg. Its metal mounting plate is 12 × 12 × 1.5 cm. Installation materials and the LED driver are supplied, so no separate bulb is selected. The fitting has no plug cable and is controlled by a conventional wall switch, which is not included. Lucide states a three-year fixture warranty, correcting the five-year value previously stored in the catalogue. Product identity should be checked before comparing warranties across variants.

230 V, IP20 and Class II

FOSKAL operates at 230 V and is intended for dry indoor locations. IP20 means it offers no protection against water, while electrical Class II identifies double or reinforced insulation. Ceiling fixing and mains connection should be carried out by a qualified installer with the circuit isolated and the manual followed. Switch off the supply and allow the fitting to cool before cleaning. Wipe the matt metal with a soft dry cloth and avoid abrasive products that could scratch or polish the sprayed finish.